Cisco MDS NX-OS zoning on the CLI

The Cisco Fabric Manager or the newer DCNM can be great for creating a limited number of zones and aliases, but when the number of zones exceeds 10 or 20 or so, creating, cloning and editing these can be a pain in the B@TT.

FC-SWITCH-01# conf t
Enter configuration commands, one per line. End with CNTL/Z.

FC-SWITCH-01(config)#

Create aliases:

FC-SWITCH-01(config)# fcalias name VM101-HBA1 vsan 45
FC-SWITCH-01(config)# member pwwn 20:21:22:25:B6:00:00:01

Enhanced zone session has been created. Please ‘commit’ the changes when done.

FC-SWITCH-01(config-fcalias)#

FC-SWITCH-01(config-fcalias)# fcalias name VM101-HBA1 vsan 45
FC-SWITCH-01(config-fcalias)# member pwwn 20:21:22:25:B6:00:00:02
FC-SWITCH-01(config-fcalias)# fcalias name VM102-HBA1 vsan 45
FC-SWITCH-01(config-fcalias)# member pwwn 20:21:22:25:B6:00:00:03

FC-SWITCH-01(config-fcalias)# device-alias commit

Create two new zones:

FC-SWITCH-01(config-zone)# zone name VM101-HBA1_VNX-5600-08-SPA6 vsan 45
FC-SWITCH-01(config-zone)# member fcalias VNX5600-08-SPA6
FC-SWITCH-01(config-zone)# member fcalias VM101-HBA1
FC-SWITCH-01(config-zone)# zone name VM102-HBA1_VNX-5600-08-SPB7 vsan 45
FC-SWITCH-01(config-zone)# member fcalias VNX5600-08-SPB7
FC-SWITCH-01(config-zone)# member fcalias VM102-HBA1
FC-SWITCH-01(config-zone)# zone commit vsan 45

Commit operation initiated. Check zone status

Now add the two new zones to a zoneset:

FC-SWITCH-01(config)# zoneset name ZS_VSAN170 vsan 45
FC-SWITCH-01(config-zoneset)# member VM101-HBA1_VNX-5600-08-SPA6
FC-SWITCH-01(config-zoneset)# member VM102-HBA1_VNX-5600-08-SPB7
FC-SWITCH-01(config-zoneset)# zone commit vsan 45

FC-SWITCH-01(config)#

Would you like to comment on this post?